Is DEUS suitable for saltwater beaches?

[FORUM XP]

Yes, DEUS has a wide range of GROUND BALANCE settings and a special signal processing method that enables it to limit most interference generated by saltwater.

After selecting BEACH ON in the (GROUND – BEACH ON/OFF) menu, you need to adjust the GROUND BALANCE manually or by pumping in the wet zone concerned in order to cancel out the ground signal.
In this mode (BEACH ON), the GROUND BALANCE settings no longer range from 60 to 90, but from 0 to 30.

[b]Note: [/b]In wet zones you can also select the WET BEACH factory programme directly, which has [u]pre-configured [/u]settings to deal with zones that are saturated with saltwater. But don't forgot to adjust the ground balance by pumping in the wet zone concerned in order to cancel out the ground signal.

Note: In wet zones (salt water), it is important to sweep while keeping the coil parallel to the ground, yet not touching it. It is also a better idea to search on flat beaches as irregularities in the ground (wet sand) generate more interference.